Pressure Regulators > Downstream Direct Acting Pressure Regulator >> DH Series
The DH Series High Pressure, High Performance, Inlet Pressure Balanced, Direct acting Regulator can be used for almost all kind of service & environments. This type of valve handles very high inlet pressure up to 210 bar(g) & higher. Due to balanced design, effect of inlet pressure variations on set pressure is minimized. The controlled downstream pressure remains constant irrespective of large changes in inlet pressure and flow as these valves have very high flow capacity. Typical application includes for commercial, industrial applications for consuming high flow rates from bank of cylinders / trolly and first stage regulator for use in multistage pressure reduction.
Easy to Maintain : Sturdy & compact design with minimum number of moving parts. Actuator Internals, Valve Disc & Trim parts can be replaced without removing the regulator from pipeline.
Glandless Construction : Where positive zero gland leakage is required, the design scores over conventional solutions such as bellow seal etc., as the gland itself is eliminated and hence there can’t be gland leakage. Glandless construction eliminates hysteresis, resulting in improvement of sensitivity & repeatability of the valve.
Tight Shut off Capability : Inlet pressure balanced & special trim design eliminates wear & erosion of seating, provinding excellent tight shut off capability over long working life.
Tamper Resistant : An adjusting screw lock nut & protective cap is standard to discourage tampering with pressure setting.
- Body Size & Connections : NPS ¾” (DN20) & NPS 1" (DN25) (Higher ratings on request)
Designed Standard : ASME B16.34
Pressure Rating : ANSI Class 1500# / 2500#
End Connection : Flanged, Socket Weld & Screwed to NPT or BSPT
- Inlet Pressure : Upto 210 Barg (Higher pressure available on request)
- Outlet Pressure :
- 3.0 to 10.0 Barg
- 8.0 to 18.0 Barg
- 17.0 to 25.0 Barg
- 22.0 to 35.0 Barg
- 30.0 to 45.0 Barg
- Higher ranges available on request
- Temperature Capabilities : -15°C to 18°C with different elastometric parts
|Adjusting Screw Cap|