Natural Gas Industry > Gas Pressure Regulator >> D62 Series
Series D62 regulator is a lever type direct acting spring loaded regulator for applications where sudden flow capacity variations are required. Typical applications include industrial, commercial gas burner applications and combustion systems as well as Nitrogen blanketing and purging applications.
The regulators are designed to maintain low pressure with high inlet pressure upto 10.0 barg. These regulators has been devised keeping in mind the maintenance and ease of replacement of seals without removing the body from the pipeline.
Lever type ensure constant downstream pressure irrespective of variation in inlet pressure and flow.
Glandless construction ensure zero leakage resulting in improved sensitivity and repeatability of valve.
Orientation in 360°direction : Regulator can be mounted in any direction and can be easily repositioned while in – Line. (exception regulators with set pressure below 17 mbar to be installed in such a way that set screw will remain below diaphragm level)
Ease of maintenance as regulator can be inspected without removing body from pipeline.
Tight shut-off capability provides excellent tight shut-off over longer working life.
Body Size & Connections : Valve size: 1½” (DN40) & 2" (DN50)
Body Rating: 150# (Higher ratings on request)
End Connection: Flanged (As per ASME B16.5)
Inlet Pressure: 0.5 barg - 10.0 barg
Set Pressure Range: 2.5 mbarg - 210 mbarg
- Temperature Capabilities : -45°C to 200°C with different elastomeric parts
|Disc & O Ring|